BendyRoad documentation
Resistor keyboard
For reading keypresses from a resistor keyboard. On an Arduino Display Shield the keys have the following outputs:
- 1=select
- 2=left
- 3=down
- 4=up
- 5=right
You can use a keyboard handler for:
- Navigating through screen pages
- Navigating through settings pages and changing settings
Reference
| Setting | Description |
|---|---|
| Disabled | To disable or enable this block. |
| Name | The name of this block. |
| ADC port | ADC input pin number; specify as: For example: 5 |
| Comment | To optionally enter a comment. It does not impact the generated firmware. |