Arduino Mega board
Properties
| Property | Description |
|---|---|
Disabled |
To disable or enable this block. |
Name |
A name for this development board. |
On-board LED |
Variable name to use for the on-board LED on pin D13. |
Source for LED |
Source for driving the LED. |
Comment |
To optionally enter a comment. |
The first block to add when you start a new project: a development board. The 'Todo' list at the bottom of the screen will remind you to add one. Development boards are under Hardware'.
The attributes of the Arduino Mega board-block are:
-
Name: By default the name is 'mega', but you can assign any name you want
-
On-board LED (on pin 13): By default 'led1' is filled in, but any other name is fine.
-
if you do not want to use the on-board LED, remove the name assigned here. You can then use pin 13 for other purposes. For example, as a System activity LED.
Characteristics of the Mega
-
CPU: ATmega2560
-
CPU flash memory: 256KB
-
SRAM: 8KB
-
EEPROM: 4KB
-
Analog inputs: 16
-
PWM digital output: 15
-
Digital I/O Pins (total): 54
-
Clock: 16 MHz