This represents a GPIO port thats active when the tick processing is active.
You can connect a LED of oscilloscope to it.
Normally this is 1000hz.
The brightness is a measure of the load the tick processing causes. The more dimmer, the more energy is saved.
With an oscilliscope you can measure how heavy the CPU is loaded.
It should never be anything near 100% pulsewidth. High values are an indication the solution you have built is too heavy for this CPU.
| Property | Description |
|---|---|
| Disabled | To disable or enable this block. |
| Pin | The pin to which the LED is connected. |
| Comment | To optionally enter a comment. It does not impact the generated firmware. |