Block:Blinker
See also:
The primary function of the Blinker block is to control the timing of on-off cycles. It can be programmed to switch any compatible device on and off at specified intervals, measured in milliseconds.
When the time is 500 milliseconds, the blinker blinks once per second. 500ms on and 500ms off.
Infocard
A variable that alternates between 1 and 0 with a regular interval.
Property | Description |
---|---|
Disabled | To disable or enable this block. |
Name | The name of this block. |
Time (ms) | Interval in milliseconds. Smaller time intervals result in faster blinking. Minimum value: 5 ms. |
Comment | To optionally enter a comment. It does not impact the generated firmware. |