Block:Schmitt-Trigger
A Schmitt trigger converts varying analogue inputs into binary outputs with defined thresholds.
It provides noise immunity and hysteresis, preventing rapid switching and ensuring stable signal processing.
Infocard
Provides hysteresis based on rising and falling edges of the input.
| Property | Description |
|---|---|
| Disabled | To disable or enable this block. |
| Name | The name of this block. |
| Type | |
| Input | Input variable |
| Lower | Lower threshold; output will be Off if falling edge is below |
| Upper | Upper threshold; output will be On if rising edge is above |
| Off | Desired output value for 'Off' condition |
| On | Desired output value for 'On' condition |
| Comment | To optionally enter a comment. It does not impact the generated firmware. |